Hot Water Tap - Princess Magic
SKU:
PM-Chrome
€199.00
€199.00
30,000 litres of water is poured down the drain every year in an average kitchen sink while waiting for hot water to arrive from the cylinder. This can be avoided by using a Hot Water Tap which is connected directly to the drinking water supply for hot and cold water at any time.
Continuous hot water is available in 3 seconds reducing wasted water and can save up to 70% of water heating costs. And because the water is fed directly from the supply coming into the house you can fill a kettle with fresh water already pre-heated to 60°C saving time to boil for tea, coffee, etc. The water is heated as it flows so no under sink storage tank is needed.
Features:
Continuous hot water is available in 3 seconds reducing wasted water and can save up to 70% of water heating costs. And because the water is fed directly from the supply coming into the house you can fill a kettle with fresh water already pre-heated to 60°C saving time to boil for tea, coffee, etc. The water is heated as it flows so no under sink storage tank is needed.
Features:
- Have hot water in 3 to 5 seconds
- No need to preheat - 24 hours on-demand hot water supply
- Cold water and hot water freely available from same tap
- Output water temperature: 30 to 60°C
- Outlet pipe can rotate in 360° freely
- Dual isolation between water and electric part
- Over-temperature protection, over-pressure protection
- Dry heating protection, Electric leakage protection, electric leakage self-checking
- Silicone Tubing In Spout To Prevent Burning When Touched
- Technical specifications:
- With CE and CCC marks
- Power voltage: 220V
- Power frequency: 50Hz (60Hz)
- Rated power: 3kW
- Flow of hot water: 2 to 2 to 2.5L/m
- Water pipe size: G1/2
- Working pressure: 0.04 to 0.6mPa
- Hot water temperatures: 30 to 60℃
- Water-proof rank: IP x4
- Surface material: ABS maximum resistant temperatures: 125 ℃
- Power wire length: 1.5 meter (under counter)
- Nominal Power Rating / 240V 3KW
- MCB Protection Device / 16Amps
- Electrical Supply / 13 Amp Three Pin Plug Or Fused Spur Outlet
- Cable Entry Point / Pre Wired/hidden installation
Tap dimensions-
- 427mm high from base – 60mm core base – 60mm shaft dept -20mm shaft width- back of tap to spout front 263mm
- Heating Range / Ambient to / 60c
- Inlet Connection / Flexi Hose/supplied
- Water Entry Points / Bottom
- Minimum Running Pressure / 0.5 bar
- Maximum Static Pressure / 2 bar pressure
- full 12 month warranty
